models available c&k 9000 series power rocker and lever handle switches features/benefits ? thermoset ul 94v-0 housing ? rugged construction ? variety of actuator and termination options ? rohs compliant typical applications ? small equipment ? shut-off switch specifications contact rating: 9201 model: 6 amps @ 120 v ac or 28 v dc; 3 amps @ 250 v ac. 9221 model: 10 amps @ 125 v ac or28 v dc; 5 amps @ 250 v ac. electrical life: 25,000 make-and-break cycles at full load. contact resistance: below 10 m typ. initial @ 2C v dc, 100 ma. insulation resistance: 10 9 min. dielectric strength: 2,500 vrms min. @ sea level. operating temperature: C0?oto 85?. solderability: per mil-std-202f method 208d, or eia rs-186e method 9 (1 hour steam aging). note: any models supplied with q contact material are rohs compliant. for the latest information regarding rohs compliance, please go to: www.ittcannon.com/rohs. note : specifications and materials listed above ar e for switches with standar d options. for information on specific and custom switches, consult customer service center . materials case: diallyl phthalate (dap) (ul 94v-0). actuator: nylon, black standard. frame-rear mount options: spring steel, black. bushing: brass, nickel plated. housing: stainless steel. switch support: brass or steel, matte-tin plated. mounting bracket: stainless steel. end contacts: 9201 model: coin silver, silver plated. 9221 model: silver cadmium oxide. center contacts: copper alloy, silver plated all terminals: 9201 model: copper alloy, silver plated. 9221 model: copper alloy, matte-tin plated. terminal seal: epoxy . hardw are: nut, scr ew & lockwasher: stainless steel. standof f: nylon standar d, aluminum available, consult customer service center . *cadmium used in electrical contacts is acceptable for rohs. build-a-switch t o or der , simply select desir ed option fr om each category and place in the appropriate box. available options are shown and described on pages h-53 through h-57. for additional options not shown in catalog, consult customer service center. switch function 9201 dp on-on, 6 amps 9221 dp on-on, 10 amps actuator j1 rocker j2 lever j3 rocker j37 rocker with metal frame actuator color 2 black 1 white 3 red frame color 2 black none no frame color required contact material q silver terminations z solder lug (9201 only) a v2 v ertical right angle, pc thru-hole (9201 only) c pc thru-hole (9201 only) z4 quick connect seal e epoxy d no seal hC3 dimensions are shown: inch (mm) specifications and dimensions subject to change www .ittcannon.com h rocker
hC4 dimensions are shown: inch (mm) specifications and dimensions subject to change www .ittcannon.com c&k 9000 series power rocker and lever handle switches switch function panel mounting 1.875 (47,62) w/ j10 actuator 1.625 (41,28) w/ j10 actuator .140 dia.(3, 56 ? w/ j10 actuator dpdt 2-1,5-4 2-3,5-6 on on on on 6 amps 10 amps 9201 9221 dp schematic connected terminals pos. 1 pos. 2 switch function pos. 1 pos. 2 rating* model no. no. poles dpdt part number shown: 9201j1zqe2 t erminal nos. molded on side of case all 9000 series models meet international dimensional and electrical requirements. * see cont act ma terial, page h-58, for complete ratings. 9221 model must be or der ed with z4 terminations and d seal option. actua torC anel mount finish: matte. other colors, custom actuator markings and legends available, consult customer service center. note: hardware: two eachounting screws, nuts, lockwashers and standoffs for 1/8 inch thick panel ar e supplied standar d on all switches with panel mounting brackets. actuators available separate - ly, see page h-56-57. hardware available separately, see technical data section of this catalog. 2 black 1 white 3 red actuator color option code j1 rocker j2 lever actuator color actua tor h rocker
hC5 c&k 9000 series power rocker and lever handle switches .313 (7,95) panel mo unting panel mounting pc mo unting actuator finish: matte. other colors, custom actuator markings and legends available, consult customer service center . note: actuators available separately, see page hC6--7. har dware: two eachounting screws, nuts, lockwashers and standoffs for 1/8 inch thick panel are supplied standard on all switches with panel mounting brackets. hardware available separately, see technical data section of this catalog . 2 black 1 white 3 red actuator color option code actuator finish: matte. frame finish: gloss. other colors, custom actuator markings and legends available, consult customer service center. note: actuators & frames available separately, see page h-56-57. hardware: two eachount- ing screws, nuts, lockwashers and standoffs for 1/8 inch thick panel are supplied standard on all switches with panel mounting brackets. hardware available separately , see t echnical data section of this catalog. not available with av2 termination. 2 black 1 white 3 red actua tor color option code 2 black frame color option code j3 rocker j37 rocker with metal frame z solder lug c pc thru-hole 9201 and 9221 note: only termination available with 9221 model. must be ordered with d seal option. mating terminal standard nema .187" quick connect. 9201 only 9201 only z4 quick connect actuatorCear mount termina tions actuatorCanel mount actua tor actuator color actua tor color frame color actua tor dimensions are shown: inch (mm) specifications and dimensions subject to change www .ittcannon.com h rocker
hC6 dimensions are shown: inch (mm) specifications and dimensions subject to change www .ittcannon.com h rocker c&k 9000 series power rocker and lever handle switches terminations contact material seal av2 vertical right angle, pc thru-hole 9201j1av2qe2 v ertical actuation dpdt note: terminal bend radii and lead-in manufacturing option. terminal spacing greater than 3mm at all points. terminal nos. molded on side of case not available with 9221 model or z4 terminations. must be or der ed with 9221 model and z4 termination. 9201 only 1 end contacts: coin silver, silver plated. 2 center contacts & all terminals: copper alloy, silver plated. 3 end contacts: silver cadmium oxide. 4 center contacts: copper alloy, silver plated. 5 z4 terminals only: copper alloy, tin plated. 6 cadmium used for electrical contacts is acceptable for rohs. note: any models supplied with q contact material is rohs compliant. for the latest information regarding rohs compliance, please go to: www.ittcannon.com/rohs. 9221 model must be ordered with z4 terminations and d seal option. all 9000 series models meet inter national dimensional and electrical requirements. * note: see t echnical data section of this catalog for rohs compliant and compatible definitions and specifications. e epoxy seal d no epoxy seal option code q 9201 9221 model cont act material silver 1,2 silver cadmium oxide 3,4,0 silver or tin 2,5 tin 5 terminal pla ting ratings rohs compliant * rohs compatible * power 6 amps @120 v ac or 28 v dc; 3 amps @ 250 v ac. 10 amps @125 v ac or 28 v dc; 5 amps @ 250 v ac. yes yes
hC7 c&k 9000 series power rocker and lever handle switches available hardware panel mounting hardware for rocker and lever handle switches is available separately. mounting hardware consists of two screws, two nuts, two standoffs and two lockwashers per switch, and is available for panel thicknesses of 1/16, 3/32 and 1/8 inch. see part numbers below. j1 & j2 actuators part no. panel thk. standoff length 761101000 1/16 in. (1,59) .295 (7,49) 761102000 3/32 in. (2,38) .264 (6,71) 761103000 1/8 in. (3,18) .233 (5,92) j1 actuator part no. 776a 01000 white 776a 02263 black 776a 03000 red material: nylon finish: matte j37 actuators part no. 445400746 black enamel 445400747 white enamel material: spring steel j2 actuator part no. 760501000 white 760502263 black 760503000 red material: nylon finish: matte j3, j37 actuators part no. 766601000 white 766602263 black 766603000 red material: nylon finish: matte typical as sembly screw panel thickness stand-off lockwasher nut stand-off length note: additional nuts, scr ews and lockwashers available separately , see technical data section of this catalog. other colors available, consult customer service center. dimensions are shown: inch (mm) specifications and dimensions subject to change www .ittcannon.com h rocker
|
